Removal Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Depressing Button On Seat Buckle

Courtesy of SUZUKI OF AMERICA CORP.

Using a small flat-bladed tool, depress the button on the seat buckle quick disconnect feature while pulling up on the shoulder belt to disengage the shoulder belt from the front seat assembly.
Remove the lower garnish molding from the center pillar. Refer to CENTER PILLAR LOWER GARNISH MOLDING REPLACEMENT .

Fig 2: Identifying Shoulder Belt Webbing Retainer & Fastener (1 Of 2)
Courtesy of SUZUKI OF AMERICA CORP.
Remove the retractor fastener and remove the retractor.
Remove the shoulder belt webbing retainer by pulling on the retainer while using a flat-bladed tool to disengage the attaching clips.
Remove the shoulder belt from the vehicle.