LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1987 >> Samurai Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Differential) >> Repair Instructions >> Differential Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to LIFTING AND JACKING THE VEHICLE .
  2. Drain the rear differential, if needed. Refer to REAR AXLE LUBRICANT REPLACEMENT .
  3. Remove the spare tire.
  4. Remove the muffler assembly. Refer to MUFFLER REPLACEMENT .
  5. Remove the rear wheel drive shafts. Refer to REMOVAL PROCEDURE .
  6. Remove the propeller shaft from the vehicle. Refer to REMOVAL PROCEDURE .
  7. Remove the rear wheel drive module clutch housing. Refer to REAR WHEEL DRIVE MODULE CLUTCH HOUSING REPLACEMENT .
  8. Support the rear differential with a transmission jack stand.
    Fig 1: Identifying Rear Differential Support Bushing Bolts
    G04843799Courtesy of SUZUKI OF AMERICA CORP.
  9. Remove the rear differential support bushing bolts.
    Fig 2: Identifying Small Electrical Connector, Large Electrical Connector, And Mounting Nuts
    G04843800Courtesy of SUZUKI OF AMERICA CORP.
  10. Remove the front mounting nuts for the rear differential (3).
  11. Lower the rear differential to gain access rear differential clutch control module.
  12. Remove the small electrical connector from the control module (1).
  13. Remove the large electrical connector from the control module (2).
    Fig 3: Identifying Rear Differential Assembly
    G04843801Courtesy of SUZUKI OF AMERICA CORP.
  14. Remove the rear differential assembly from the vehicle.
scientia non olet · About LEMON Manuals