Differential Carrier Cover and Seal Replacement - Left Side

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Differential Side Cover, Seal, And Bolts

Courtesy of SUZUKI OF AMERICA CORP.

PROCEDURE TABLE

Callout	Component Name
Preliminary Procedure Remove the rear differential assembly. Refer to REMOVAL PROCEDURE .
1	Differential Side Cover Bolts (Qty: 8) CAUTION: Refer to FASTENER NOTICE . Tip: Finger tighten the bolts before torquing to specification. Tightening torque Tighten the bolts in a criss cross pattern to 29 N.m (21 lb ft).
2	Differential Side Cover Tip: Inspect the differential side cover for any damage. If the side cover is damaged, replace the differential assembly. The side cover is not serviced separately.
3	Differential Side Cover Seal Before installing the side cover seal, ensure that the groove for the side cover seal is free of dirt and debris. This will ensure that the seal seat properly in the differential housing. Apply a small amount of clean oil to the side cover seal.