LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1987 >> Samurai Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Heater And Ventilation) >> Repair Instruction >> Air Temperature Door Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Mode Actuator Screws
G04844408Courtesy of SUZUKI OF AMERICA CORP.
  1. Remove the HVAC module. Refer to REMOVAL PROCEDURE .
  2. Remove the evaporator case assembly. Refer to REMOVAL PROCEDURE .
  3. Remove the mode actuator screws from the evaporator case assembly.
  4. Remove the mode actuator from the evaporator case assembly.
    Fig 2: Identifying Mode Cam Bracket Screws
    G04844409Courtesy of SUZUKI OF AMERICA CORP.
  5. Remove the screws retaining the mode cam bracket (1) from the evaporator case assembly.
  6. Remove the mode cam bracket (1) from the evaporator case assembly.
  7. Remove the mode cam (2) and the mode cam levers (1) from the evaporator case assembly.
    Fig 3: Identifying Evaporator Case Halves Retaining Screws
    G04844410Courtesy of SUZUKI OF AMERICA CORP.
  8. Remove the screws retaining the two evaporator case halves.
  9. Separate the evaporator case halves.
    Fig 4: Identifying Evaporator Case Assembly Temperature Door
    G04844411Courtesy of SUZUKI OF AMERICA CORP.
  10. Remove the temperature door from the evaporator case assembly.
scientia non olet · About LEMON Manuals