LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2008 >> G37 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 66 (Engine Control System - DTCS P0643 To P2A03) >> P1220 Fuel Pump Control Module (FPCM) >> DTC Confirmation Procedure >> With CONSULT-III
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

With CONSULT-III

WARNING: This page is about a different car, the 2008 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch ON and select "DATA MONITOR" mode with CONSULT-III.
  2. Make sure that "COOLAN TEMP/S" indicates less than 70°C (158°F). If not, cool down the engine.
  3. Start engine.
  4. Hold vehicle at the following conditions for 12 seconds.
    ENG SPEED SPECIFICATIONS

    ENG SPEED 1, 100 - 2, 600 RPM
    VHCL SPEED SE More than 70 km/h (43 MPH)
    B/FUEL SCHDL 0 - 25 msec
    Selector lever Suitable position
  5. Check 1st trip DTC.
  6. If 1st trip DTC is detected, go to , "DIAGNOSIS PROCEDURE ".
scientia non olet · About LEMON Manuals