LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2002 >> Durango Base, 5.9 Z, 4WD, Part Time >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Removal, Overhaul & Installation >> Computerized Engine Controls >> Powertrain Control Module >> Removal & Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal & Installation

  1. PCM is located in the engine compartment. See Fig 1, Fig 2 or Fig 3 . Turn ignition off and disconnect negative battery cable. Remove cover for access to electrical connectors at PCM. Disconnect electrical connectors from PCM. Remove PCM retaining bolts and PCM.
  2. To install, reverse removal procedure. Tighten PCM retaining bolts to specification. See TORQUE SPECIFICATIONS .
Fig 1: Locating Powertrain Control Module (Dakota)
G98I00080Courtesy of CHRYSLER CORP.
Fig 2: Locating Powertrain Control Module & Connectors (Except NGC)
G00088600Courtesy of DAIMLERCHRYSLER CORP.
Fig 3: Locating Powertrain Control Module (NGC)
G00096073Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals