Tie Rod &/Or End: Remove & Replace
WARNING: This page is about the V90 T5 Inscription, which is a different variant/trim than selected.
Includes: Adjust toe-in only. NOTE: Deduct .4 if alignment is also performed.
NOTE: Manufacturer recommends removal of Rack and Pinion Steering Gear when replacing Inner Tie Rod End(s) on some models. If removal of the Rack and Pinion Gear is necessary, use Steering Gear - R&R plus combinations.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| All | 1.8 | B | ||
| Inner,Both | 1.4 | B | ||
| Inner,One | 1.0 | B | ||
| Outer,Both | 1.4 | B | ||
| Outer,One | 1.0 | B | ||
| Combination Procedure: STEERING ANGLE SENSOR: Calibrate: | ||||
| Reset Long Term Wheel Angle Compensation | Includes: Additional time for use of scan tool to perform this procedure. | 0.3 | B | |