LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volvo >> 2013 >> XC90 Base, FWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Control Modules - Signal Specification For Diagnostic Procedures >> Fault-Tracing >> Signal Specification, RTI >> Connecting The Breakout Box And Checking The Ground Terminal >> TV Receiver (To RTI Control Module)
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

TV Receiver (To RTI Control Module)

Fig 1: Connector, Green (16- Pin)
GLL104026Courtesy of VOLVO CARS CORPORATION

Before taking any readings, see CONNECTING THE BREAKOUT BOX AND CHECKING THE GROUND TERMINAL .

TV receiver terminals M1-M16 correspond to terminals #25-#40 on the breakout box.

Control module terminal  Breakout box terminal Signal type  Ignition on  Other 
M1 #25 Video signal, TV Analog signal 1 V p-p +/- 0.2 V
M2 #26 Synchronizing signal, TV Digital signal 0-5 V
M3 #27 - - -
M4 #28 - - -
M5 #29 - - -
M6 #30 - - -
M7 #31 30 supply Ubat -
M8 #32 Signal ground, TV signals Ulow -
M9 #33 Screen ground, TV signals Ulow -
M10 #34 - - -
M11 #35 - - -
M12 #36 - - -
M13 #37 Signal, remote control TV Digital signal 33.3 kHz carrier wave when
the remote control is pressed
M14 #38 - - -
M15 #39 Ground (Measured to battery negative terminal) Ulow -
M16 #40 - - -


Fig 1: Audio Control Module (Cable Between Audio Module & CD Changer/Navigation Unit)
GLL104159Courtesy of VOLVO CARS CORPORATION

Before taking any readings, see CONNECTING THE BREAKOUT BOX AND CHECKING THE GROUND TERMINAL .

TV receiver terminals O1-O8 correspond to terminals #16-#23 on the breakout box.

Control module terminal  Breakout box terminal Signal type  Ignition on  Other 
O1 #16 Clock signal to TV receiver Digital signal Melbus protocol
O2 #17 Signal ground, sound Ulow -
O3 #18 15 supply Ubat -
O4 #19 Data signal to TV receiver Digital signal Melbus protocol
O5 #20 Busy signal to TV receiver Digital signal Melbus protocol
O6 #21 Left audio channel Alternating current when there is sound to the loudspeaker 150 mV rms +/- 38 mV
(1 kHz 30% mod)
O7 #22 Right audio channel Alternating current when there is sound to the loudspeaker 150 mV rms +/- 38 mV
(1 kHz 30% mod)
O8 #23 Voice guide channel Alternating current when there is sound to the loudspeaker (during voice guidance) -
H Screen ground, cable to audio unit Ulow -