Checking The Cable And Component

Check the leads between Power Operated Tailgate Module (POT) and the external handle. Also investigate the connector in Power Operated Tailgate Module (POT) and the connector in the external handle with regards to loose connection and oxidation.

If the leads are intact, replace external handle.

Remedy as necessary.

Other information 

• see LOCATION OF COMPONENTS
• see SIGNAL SPECIFICATION
• see OUTER TAILGATE/TRUNK LID HANDLE
• see CHECKING WIRING AND TERMINALS

Was a fault detected? 

• YES 

  Refer to VERIFICATION 

• NO 

  Refer to CHECKING SOFTWARE