Removing The Integrated Relay / FUSEBOX

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2014 Volvo XC90, 2013 Volvo XC90, 2012 Volvo XC90, 2011 Volvo XC90, and 2010 Volvo XC90. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Battery Leads, Screws And Nut

Courtesy of VOLVO CARS CORPORATION

Remove:

the nut for the power supply cables
the 2 power supply cables
the 2 screws for the mounting.

Fig 2: Locating Connector And Cable Harness From Fusebox

Courtesy of VOLVO CARS CORPORATION

Open the integrated relay/fusebox. Remove the connector (1).

Disconnect the cable harness from the box (2).

Lift the box out of the mounting and move it to one side.