Installing The Right-Hand Level Sensor

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2014 Volvo XC90, 2013 Volvo XC90, 2012 Volvo XC90, 2011 Volvo XC90, and 2010 Volvo XC90. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Fuel Level Sensor Retaining Clips

Courtesy of VOLVO CARS CORPORATION

Install:

the new level sensor
the wiring in the holder
the thin pipe in the holder on the outside of the fuel tank unit
the tie strap around the wiring above the pump

Fig 2: Identifying Tie Straps Around Protective Sheath, Hoses And Wiring

Courtesy of VOLVO CARS CORPORATION

Install:

the tie strap under the protective sheath. Secure the tie strap on the smooth central section of the corrugated hose
the protective sheath
four tie straps around the protective sheath, hoses and wiring. Secure the tie straps on the four smooth central sections of the corrugated hose.