Exposing the sub-frame

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Cable Duct Screw And Ground Lead Screw

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove:

the screw for the cable duct
the screw for the ground lead.

Fig 2: Front Engine Pad Screw

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the screw for the front engine pad.

Fig 3: Identifying Oil Pipe For Steering Gear, Screw Clip For Steering Gear Return Line And Fuel Line For Engine Block Heater

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove:

the oil pipe for the steering gear from the snap fasteners along the sub-frame
the screw clip for the steering gear return line
the fuel line for the engine block heater and the engine block heater (if applicable) on the left side of the sub-frame.

Fig 4: Identifying Torque Rod To Engine Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the 4 screws holding the torque rod to the engine.

Fig 5: Identifying Anti-Roll Bar Links

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the anti-roll bar links from the anti-roll bar on both sides. Counterhold using a Torx wrench so that the ball joint boot is not damaged.