Section 5 (Transmission Control Module Diagnostic Trouble Codes - 1 Of 2)

• TCM-0002: Shift Solenoid S1. Signal Missing
  • Diagnostic Trouble Code (DTC) Information
  • Signal Missing
    • Checking Shift Solenoid S1
    • Checking The Wiring And Component
    • Resetting Adaptation
      • Resetting Adaptation And The Counter For "Transmission Oil Change"
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• TCM-0003: Shift Solenoid S1. Signal Too Low
  • Diagnostic Trouble Code (DTC) Information
  • Signal Too Low
    • Checking Shift Solenoid S1
    • Checking The Wiring And Component
    • Resetting Adaptation
      • Resetting Adaptation And The Counter For "Transmission Oil Change"
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• TCM-0008: Shift Solenoid S2. Signal Missing
  • Diagnostic Trouble Code (DTC) Information
  • Signal Missing
    • Checking Shift Solenoid S2
    • Checking The Wiring And Component
    • Resetting Adaptation
      • Resetting Adaptation And The Counter For "Transmission Oil Change"
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• TCM-0009: Shift Solenoid S2. Signal Too Low
  • Diagnostic Trouble Code (DTC) Information
  • Signal Too Low
    • Checking Shift Solenoid S2
    • Checking The Wiring And Component
    • Resetting Adaptation
      • Resetting Adaptation And The Counter For "Transmission Oil Change"
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• TCM-001E: Transmission Output Speed Sensor. Signal Missing
  • Diagnostic Trouble Code (DTC) Information TCM-001E
  • Signal Missing
    • Checking The Component And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• TCM-001F: Vehicle Speed Sensor (VSS). Signal Missing
  • Diagnostic Trouble Code (DTC) Information TCM-001F
  • Signal Missing
• TCM-0020: Transmission Output Speed Sensor. Faulty Signal
  • Diagnostic Trouble Code (DTC) Information TCM-0020
  • Faulty Signal
    • Checking The Components And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• TCM-0022: Transmission Speed Sensor. Signal Missing
  • Diagnostic Trouble Code (DTC) Information TCM-0022
  • Signal Missing
    • Checking The Components And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• TCM-0023: Transmission Input Speed Sensor. Signal Missing
  • Diagnostic Trouble Code (DTC) Information TCM-0023
  • Signal Missing
• TCM-0024: Transmission Speed Sensor. Faulty Signal
  • Diagnostic Trouble Code (DTC) Information TCM-0024
  • Faulty Signal
    • Checking The Components And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• TCM-0027: Back-Up Gear. Incorrect Gear Ratio
  • Diagnostic Trouble Code (DTC) Information TCM-0027
  • Incorrect Gear Ratio
    • Checking The Oil Quality And The Oil Level In The Transmission
    • Checking For Contact Resistance And Oxidation
    • Replacing The Transmission
    • Checking The Function Of The Transmission
    • Replacing Transmission
    • Resetting Adaptation
      • Resetting Adaptation And The Counter For "Transmission Oil Change"
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• TCM-0028: 1ST Gear. Incorrect Gear Ratio
  • Diagnostic Trouble Code (DTC) Information
  • Incorrect Gear Ratio
• TCM-002E: Lock-Up Function. Jerks Or Does Not Engage
  • Diagnostic Trouble Code (DTC) Information TCM-002E
  • Jerks Or Does Not Engage
    • Checking The Oil Quality And The Oil Level In The Transmission
    • Checking Noise In Transmission
    • Replacing Transmission
    • Replacing Transmission Control System
    • Resetting The Transmission Fluid Change Counter
      • Resetting The Transmission Fluid Change Counter
    • Resetting Adaptation
      • Resetting Adaptation And The Counter For "Transmission Oil Change"
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• TCM-002F: Lock-Up Function. Slips Or Does Not Engage
  • Diagnostic Trouble Code (DTC) Information TCM-002F
  • Slips Or Does Not Engage
    • Diagnostic Trouble Code TCM-002E
    • Checking Lock-Up Solenoid SLU
    • Checking The Oil Quality And The Oil Level In The Transmission
    • Replacing Transmission
    • Replacing Transmission Control System
    • Checking For Permanent Or Intermittent Faults
    • Intermittent Fault
    • Fault-Tracing
    • Changing Transmission Oil
    • Resetting Adaptation
      • Resetting Adaptation And The Counter For "Transmission Oil Change"
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
    • Resetting The Transmission Fluid Change Counter
      • Resetting The Transmission Fluid Change Counter
• TCM-0039: Gear-Shift Position Sensor. Faulty Signal
  • Diagnostic Trouble Code (DTC) Information TCM-0039
  • Faulty Signal
    • Checking Gear-Shift Position Sensor
    • Erasing Diagnostic Trouble Code (DTC)
    • Calibrating The Position Sensor In The Control Module
    • Reading Off Diagnostic Trouble Codes (DTCS)
• TCM-0042: Counter, Oil Quality. The Counter Exceeds The Limit Value
  • Diagnostic Trouble Code (DTC) Information TCM-0042
  • The-Counter: Exceeds The Limit Value
    • Checking Oil Temperature
    • Checking The Wiring And Component
    • Test Driving
    • Fault-Tracing Information
    • Resetting The Transmission Fluid Change Counter
      • Resetting The Transmission Fluid Change Counter
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• TCM-0043: Oil Temperature Sensor. Temperature Too High
  • Diagnostic Trouble Code (DTC) Information TCM-0043
  • Temperature Too High
    • Checking Transmission Fluid Temperature Sensor
    • Checking Cable And Component
    • Resetting The Transmission Fluid Change Counter
      • Resetting The Transmission Fluid Change Counter
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• TCM-0044: Oil Temperature Sensor. Temperature Too Low
  • Diagnostic Trouble Code (DTC) Information TCM-0044
  • Temperature Too Low
    • Checking Transmission Fluid Temperature Sensor
    • Checking Cable And Component
    • Resetting The Transmission Fluid Change Counter
      • Resetting The Transmission Fluid Change Counter
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• TCM-0045: Oil Temperature Sensor. Faulty Signal
  • Diagnostic Trouble Code (DTC) Information TCM-0045
  • Faulty Signal
    • Checking Transmission Fluid Temperature Sensor
    • Checking Cable And Component
    • Resetting The Transmission Fluid Change Counter
      • Resetting The Transmission Fluid Change Counter
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• TCM-0046: Oil Temperature Sensor. Temperature Too High
  • Diagnostic Trouble Code (DTC) Information TCM-0046
  • Temperature Too High
    • Checking Oil Cooler And Hoses
    • Resetting The Transmission Fluid Change Counter
      • Resetting The Transmission Fluid Change Counter
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• TCM-0048: Transmission Control Module (TCM). Faulty Software
  • Diagnostic Trouble Code (DTC) Information TCM-0048
  • Faulty Software
    • Programming Control Module
• TCM-0049: Transmission Control Module (TCM). Internal Fault
  • Diagnostic Trouble Code (DTC) Information TCM-0049
  • Internal Fault
    • Erasing Diagnostic Trouble Code (DTC)
    • Reading Off Diagnostic Trouble Codes (DTCS)
    • Replacing Control Module And Programming
• TCM-0070: Function, Immobilizer. Signal Missing
  • Diagnostic Trouble Code (DTC) Information TCM-0070
  • Signal Missing
    • Checking The Start Inhibitor Status
    • Checking Wiring And Sensors
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• TCM-0071: Function, Immobilizer. Faulty Signal
  • Diagnostic Trouble Code (DTC) Information TCM-0071
  • Faulty Signal
    • Checking The Start Inhibitor Status
    • Checking Wiring And Sensors
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• TCM-0075: Function, Shift-Lock. Signal Missing
  • Diagnostic Trouble Code (DTC) Information TCM-0075
  • Signal Missing
    • Checking The Shift-Lock Function
    • Checking The Wiring And Component
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• TCM-0076: Function, Shift-Lock. Faulty Signal
  • Diagnostic Trouble Code (DTC) Information TCM-0076
  • Faulty Signal
    • Checking The Shift-Lock Function
    • Checking The Wiring And Component
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• TCM-0081: Transmission Output Speed Sensor. Signal Missing
  • Diagnostic Trouble Code (DTC) Information TCM-0081
  • Signal Missing
    • Checking Wiring And Sensors
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• TCM-0082: Transmission Output Speed Sensor. Signal Missing
  • Diagnostic Trouble Code (DTC) Information TCM-0082
  • Signal Missing
    • Checking Wiring And Sensors
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• TCM-0087: Transmission Speed Sensor. Signal Missing
  • Diagnostic Trouble Code (DTC) Information TCM-0087
  • Signal Missing
    • Checking Wiring And Sensors
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• TCM-0088: Transmission Speed Sensor. Signal Missing
  • Diagnostic Trouble Code (DTC) Information TCM-0088
  • Signal Missing
    • Checking Wiring And Sensors
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• TCM-0090: Shift Lock Solenoid. Signal Too High
  • Diagnostic Trouble Code (DTC) Information TCM-0090
  • Signal Too High
    • Checking The P-Shift Lock Solenoid Function
    • Checking The Wiring And Component
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• TCM-0091: Shift-Lock Solenoid. Signal Missing
  • Diagnostic Trouble Code (DTC) Information TCM-0091
  • Signal Missing
    • Checking The P-Shift Lock Solenoid Function
    • Checking The Wiring And Component
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• TCM-0092: Shift-Lock Solenoid. Signal Too Low
  • Diagnostic Trouble Code (DTC) Information TCM-0092
  • Signal Too Low
    • Checking The P-Shift Lock Solenoid Function
    • Checking The Wiring And Component
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• TCM-0096: Gear Selector Module (GSM). Signal Missing
  • Diagnostic Trouble Code (DTC) Information TCM-0096
  • Signal Missing (2007-2011 Early)
    • Checking Function Of The Gear Position Sensor
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
  • Signal Missing (2011 Late-2013)
    • Checking Function Of The Gear Position Sensor
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information