Tie Rod &/Or End: Remove & Replace

Includes: Adjust toe-in only. NOTE: Deduct .4 if alignment is also performed. NOTE: Manufacturer recommends removal of Rack and Pinion Steering Gear when replacing Inner Tie Rod End(s) on some models. If removal of the Rack and Pinion Gear is necessary, use Steering Gear - R&R plus combinations.

Applies To	Note	Standard Hours	Warranty Hours	Skill Level
Each Additional		0.3		B
One		0.9		B
Combination Procedure: STEERING ANGLE SENSOR: Calibrate:
	Includes: Additional time for use of scan tool to perform this procedure.	0.3		B