Engine, Fuel & Ignition Control Systems - Removal & Installation, Specifications
- Ignition And Control Systems
- Specifications, Mechanical
- Steering Wheel With Switches
- Disassembling
- Notes
- Ignition Off. Disconnect Battery Negative Lead
- Removing Steering Wheel Screws
- Removing Steering Wheel Module
- Placing The Steering Wheel Module
- Connecting Special Tool
- Slacken Off Center Screw
- Reconnect The Battery Negative Lead
- Align Front Wheels
- Disconnect The Battery Negative Lead
- Remove Special Tool
- Secure The Contact Reel
- Remove The Steering Wheel Center Screw
- Remove Steering Wheel, Steering Wheel Covers And Switches
- Assembling
- Zeroing Contact Reel
- Install Switches, Steering Wheel Covers And Steering Wheel
- Install Center Screw
- Unlocking The Contact Reel
- Connect Special Tool
- Reconnect The Battery Negative Lead
- Align Front Wheels
- Tightening Center Screw
- Ignition Off. Disconnect Battery Negative Lead
- Remove Special Tool
- Ignition In Position I
- Install Steering Wheel Module
- Tighten Steering Wheel Screws
- Conclusion
- Disassembling
- Taking Fuel Pressure Readings While Driving The Car
- Temperature And Pressure Sensor, Replacing
- Engine Coolant Temperature Sensor, Replacing
- Test Phases, Quick Test Fuel Tank System (B5234T3; B5244T5; B5254T2; B5254T4; 2003-2007)
- Test Phases, Quick Test Fuel Tank System (B5244S; 2003-2007)
- CAN Network
- Thermostat, Replacing (B5234T3; B5254T2; B5254T4; 2003-2004)
- Throttle Body (Electronic Throttle Module (ETM)), Replacing
- Throttle Body (TB), Cleaning (B5234T3; B5244T3; 2001-2004)
- Throttle Body (TB), Cleaning (B5244S; B5244S6; 2001-2004)
- Timing Cover Front, Replacing
- Variable Valve Timing Control
- Variable Valve Timing Solenoid, Replacing
- Variable Valve Timing Solenoid, Replacing (6-cylinder engines)
- Variable Valve Timing Unit, Checking And Adjusting (B5234T3; B5244T3; 2001)
- Notes
- Installing And Adjusting The Variable Valve Timing Unit/Gear Pulley On The Camshafts.
- Notes
- Installing The Crankshaft Adjustment Tool
- Installing The Variable Valve Timing (VVT) Unit On The Camshaft
- Installing The Timing Gear Pulley On The Exhaust Camshaft
- Checking The Tensioner And Idler Pulleys
- Installing The Tensioner/Damping Unit
- Installing The Timing Belt
- Tensioning Of Cam Belt
- Tightening
- Checking The Markings And Belt Tension
- Variable Valve Timing Unit, Checking And Adjusting (B5244S; 2001-2007)
- Variable Valve Timing Unit, Checking And Adjusting (B5XX4TX; 1999-2001)
- Variable Valve Timing Unit, Checking And Adjusting (B5XX4S and B5XX4S2; 2002-)
- Variable Valve Timing Unit, Checking And Adjusting (B6XX4T; 2002-2006)
- Notes
- Installing The Crankshaft Adjustment Tool
- Aligning The Crankshaft
- Installing The Variable Valve Timing (VVT) Unit On The Exhaust Camshaft
- Installing The Variable Valve Timing (VVT) Unit On The Intake Camshaft
- Installing The Camshaft Belt
- Preparations For Adjusting The Timing Belt
- Adjusting The Timing Belt
- Checking The Markings And Belt Tension
- VVT Solenoid, Inspection And Cleaning