LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volvo >> 2003 >> C70 2.3 53, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Wheel Alignment - Specifications & Procedures) >> Wheel Alignment Procedures >> Toe-In Adjustment >> Rear Adjustment (FWD Models)
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Rear Adjustment (FWD Models)

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2000 Volvo V70, 2000 Volvo S70, 2000 Volvo C70, 1999 Volvo V70, and 1999 Volvo S70. However, it is still accessible from the selected car via links, so may be relevant.
  1. To adjust toe-in, loosen transverse arm nuts. See Fig 1 . Move transverse arms forward or rearward until correct value is obtained. Tighten one nut on each transverse arm anchor to lock it in relation to other trailing arm.
  2. Replace other bolts and nuts that are not tightened with new bolts or nuts. Tighten nuts to 37 ft. lbs. (50 N.m), then tighten an additional 120 degrees. Replace 2 previously tightened bolts and nuts. Tighten to specification.
Fig 1: Locating Transverse Arm Retaining Nuts (FWD Models)
G93F82383Courtesy of VOLVO CARS OF NORTH AMERICA.
scientia non olet · About LEMON Manuals