Installing The Control Module

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2009 Volvo S60, 2008 Volvo S60, 2007 Volvo S60, 2006 Volvo S60, and 2005 Volvo S60. However, it is still accessible from the selected car via links, so may be relevant.

Press the control module into place so that the catch on the rear engages
Position the connector. Carefully press the connector down.

NOTE:

The pins are fragile. Check that the connector goes straight down into the control module.

Tighten the screw for the connector
Check that the connector cover is correctly positioned. Remedy if necessary
Install the relays and shunts. For relay locations, see instruction Relay Location .
Install the integrated relay / fusebox, see Installing The Integrated Relay / Fusebox In The Cargo Compartment .