Mechanical Inspection: Compression
WARNING: This page is about a different car, the 1997 Volvo 960. However, it is still accessible from the selected car via links, so may be relevant.
Check engine mechanical condition using a compression gauge, vacuum gauge or engine analyzer. See engine analyzer manual for specific instructions.
WARNING:
DO NOT
use ignition switch during compression tests on fuel injected vehicles. Use a remote starter to crank engine. Fuel injectors on many models are triggered by ignition switch during cranking mode, which can create a fire hazard or contaminate engine oiling system.
COMPRESSION SPECIFICATIONS
| Application | Specification |
|---|---|
| Compression Ratio | 10.7:1 |
| Compression Pressure (Minimum) | 170-199 psi (12-14 kg/cm2 ) |