LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volvo >> 1995 >> 940 Base, 4D Wagon, AW71L >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Testing - Turbo >> Fuel System >> Fuel Pressure >> Fuel Pump Circuit
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Fuel Pump Circuit

  1. Remove fuel injection system relay. Check voltage at terminal No. 30. See Figure and Figure . If battery voltage does not exist, repair wiring between relay connector and battery.
  2. Connect jumper wire between terminals No. 30 and 87/2 of fuel injection system relay connector. Fuel pump should run. If fuel pump does not run, check wiring between pump and relay. Also, check wiring between terminals No. 87/1 and 85 for continuity. Repair as necessary.
NOTE: ECU terminal identifications are marked on unit or connector.
CAUTION: Ensure ignition is off when connecting or disconnecting ECU connector.