Front Axle Camber, Adjusting: Notes
The front axle camber is not adjustable and it can only be slightly corrected by sliding the subframe.
Slide the subframe only toward left or right, under no circumstances slide it in or against direction of travel!
-- Remove the front underbody trim panel. Refer to Front Underbody Trim Panel, Removing and Installing .
-- Remove the bolts -2- individually one after the other and loosely install a new bolt.
-- Only remove any other bolt -2-, if the previously removed bolt has been replaced by a new bolt -2- already.
Adjusting the camber is limited by the subframe -1- hole tolerances. If the specified value is not reached by moving the subframe -1-, the subframe and the assembly must be checked.
-- By moving the subframe -1-, only the specified value of the camber can be adjusted.
-- Slide the subframe -1- to the side until the camber is even on both sides. Refer to Axle Alignment Specified Values .
-- Tighten the bolts -2-.