Body Repair Safety Precautions

CAUTION:

If welding, soldering or cutting with spark producing tools in foamed areas hazardous gases are produced.

- Do not weld, solder or separate within 15 mm of molded foam parts.

- Perform the procedures with extraction

Note the Safety Precautions → Refer to General Information; Body Collision, Body Repairs; Safety Precautions.

Welding and sanding must be carried out with ventilation.
Clean the exhaust extraction system regularly.
Never weld and sand in any area at the same time.
Clean the work area regularly depending on the amount of dust.
Do not blow out the accumulated with compressed air.
Follow all country specific regulations regarding accident prevention and safety on the workplace.