Heating And Air Conditioning Control Module J979, Removing And Installing: Removing

WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.

If the Heating and Air Conditioning Control Module -J979- is being replaced:

-- Perform the "Control module, replacing" function using the Vehicle Diagnostic Tester. Refer to Diagnostic Entries .

Continuation

-- Remove the glove compartment lid. Refer to GLOVE COMPARTMENT LID, REMOVING AND INSTALLING .

-- Disconnect the connectors -3-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Use a commercially available plastic wedge to release the securing tab -arrow- from the bracket -2-.

-- Remove the Heating and Air Conditioning Control Module -J979-.