Information Electronics Control Module 1 -J794-, Removing And Installing: Removing

WARNING: This page is about a different car, the 2025 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

-- Turn off the ignition and all electrical equipment.

-- Move the ignition key outside of the vehicle to prevent the ignition from switching on unintentionally.

-- Open the glove compartment.

-- Remove any data storage device still in the Information Electronics Control Module 1 -J794-.

-- Insert two of the Radio Removal Tool :T10057 into the release slots on the Information Electronics Control Module 1 -J794- -1- until they engage.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

The points on grip eyes must face outward.

-- Remove the Information Electronics Control Module 1 -J794- -1- from the glove compartment at the Radio Removal Tool :T10057 grip eyes.

-- Release and disconnect the connectors from the Information Electronics Control Module 1 -J794- -1-.

-- Press the locking tabs on the Information Electronics Control Module 1 -J794- and remove the Radio Removal Tool :T10057 .