Data Bus On Board Diagnostic Interface J533, Removing And Installing: Removing
If the diagnostic interface is replaced:
-- Perform the necessary function/functions. Use the Vehicle diagnostic tester. Refer to Diagnostic Entries .
Continuation
-- Remove the glove compartment lid. Refer to Glove Compartment Lid, Removing and Installing .
Only for RHD
-- Remove the front passenger side instrument panel cover. Refer to the appropriate service information. .
Continuation for all vehicles
-- Release the hook -1-.
-- Remove the on board diagnostic interface -3- until the connectors -2- are accessible.
-- Disconnect the connectors -2-.
-- Remove the diagnostic interface -3-.