Guidelines For Clean Working Conditions

Even minor contamination can lead to malfunctions and leaks. Therefore, follow these guidelines for clean working conditions during all work:

• Thoroughly clean the connection points/maintenance openings and the surrounding area before loosening/opening.
• Use lint free cleaning cloth for cleaning.
• Seal off cables, connections and components immediately after opening them, using seals from the Engine Bung Set :VAS 6122  .
• Place removed components on a clean surface and cover them with lint free cleaning cloths.
• Carefully cover or seal opened components.
• Immediately remove leaking liquids and clean the affected areas.
• Only install clean components. Wear clean gloves and remove replacement parts from the packaging just before installing.
• Supplied transport and protective packaging and sealing cover should only be removed immediately before installing.
• Protect the disconnected electrical or optical connectors from dirt and moisture and only connect when they are dry.

Vehicle and Engine Wash:

• Never direct the jet of water from a pressure washer at electrical components or connectors when cleaning the vehicle or engine.