Front Longitudinal Member, Replacing: Notes
WARNING: This page is about a different car, the 2025 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
If welding, soldering or cutting with spark-producing tools in foamed areas hazardous gases are produced.
- Never weld, solder or separate within 15 mm of molded foam parts.
- Perform the procedures with extraction.
Pay attention to the safety precautions. Refer to General Information; Body Repairs, Body Collision Repair ; Safety Precautions.
- Remove the subframe retaining bracket, longitudinal member reinforcement and end plate. Refer to SUBFRAME RETAINING BRACKET, REPLACING .
- Front Longitudinal Member
- Headlamp Bracket
- Not included in the front longitudinal member contents, use if necessary.
- Subframe Retaining Bracket
- Replacing. Refer to SUBFRAME RETAINING BRACKET, REPLACING .
- Longitudinal Member Reinforcement
- To be used in conjunction
- End Plate
- To be used in conjunction