Windshield Projection Head Up Display Control Module -J898-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.

If the windshield projection control module is replaced, perform the test plan for replacing the windshield projection control module.

-- Perform the "Windshield projection head up display control module, replacing" function using the. Refer to DIAGNOSTIC ENTRIES .

Continuation

-- Remove the windshield. Refer to WINDSHIELD, REMOVING AND INSTALLING .

-- Remove the dynamic lighting strip. Refer to Dynamic Information Lighting Strip 3 -L385-, REMOVING AND INSTALLING .

-- Remove the windshield projection cover. Refer to INSTRUMENT PANEL DECORATIVE TRIM, REMOVING AND INSTALLING .

-- Move instrument panel noise insulation to the side.

-- Cover the windshield projection control module -1- with a soft cleaning cloth.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -arrows-.

-- Remove the windshield projection control module -1- until the connectors are accessible.

-- Disconnect the connectors.

-- Remove the windshield projection control module -1-.