Windshield, Removing And Installing: Installing

WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.

Undamaged window glass

-- Refer to Undamaged Window Glass, Preparing for Installation .

New window glass

-- Refer to New Window Glass, Preparing for Installation .

Continuation for all vehicles

-- Refer to Body Flange, Preparing for Installation .

-- Follow the BONDED WINDOWS AND GLASS PANELS, INSTALLATION INSTRUCTIONS .

-- Note the MINIMUM CURING TIMES FOR BONDED WINDOWS .

-- Apply the window adhesive on the windshield all around. Refer to BONDED GLASS PANELS, MATERIALS .

Dimensions for bead diameter:

Height = 10 mm ± 1 mm
Width = 6.5 mm ± 0.5 mm

Install in reverse order of removal. Note the following:

-- Check the body gap dimensions using the Gauge - Gap Adjustment: 3371 . Note the BODY FRONT when doing this.

-- Perform the "Windshield, Removing and Installing" functions, using the Vehicle Diagnostic Tester. Refer to Diagnostic Entries .