ABS Control Module -J104- / ABS Hydraulic Unit -N55-, REMOVING AND INSTALLING: Notes

WARNING: This page is about a different car, the 2025 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Open Ring Spanner Insert - AF 11mm : V.A.G 1410/6

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Torque Wrench - Universal Joint : V.A.G 1410/7

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Brake Pedal Actuator : V.A.G 1869/2 .

Fig 1: Identifying Brake Pedal Actuator
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Torque Wrench - Assembly Tool : V.A.G 1410/8

Fig 2: Identifying Torque Wrench - Assembly Tool
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Plugs assembly part 5Q0 698 311

Fig 3: Plug 5 Q 0 698 311

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

1 - M10 Plug

2 - M12 Plug

Component Location:

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

The ABS Control Module -J104- is attached to the ABS Hydraulic Unit -N55- and is located inside the engine compartment on the right side.