Infotainment System Display, Removing And Installing: Removing
WARNING: This page is about a different car, the 2025 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn off the ignition and all electrical equipment.
-- Move the ignition key outside of the vehicle to prevent the ignition from switching on unintentionally.
-- Remove the display cover. Refer to DISPLAY COVER, REMOVING AND INSTALLING .
-- Insert the Radio Removal Tool :T10057 in the release slots -2- of the Front Information Display Control Head -J685- -1-.
- The points at the grip eyelets of the Radio Removal Tool :T10057 must face outward.
-- Release the upper locking mechanisms -2- by pushing in the -direction of the arrow-.
-- Release the lower locking mechanisms -2- by pushing in the -direction of the arrow-.
-- Remove the Front Information Display Control Head -J685- -1-.
-- Release and disconnect the connectors.