Rear Side Window, Removing And Installing: Installing

Install in the reverse order of removal while noting the following:

Undamaged window glass

-- Refer to UNDAMAGED WINDOW GLASS, PREPARING FOR INSTALLATION .

Continuation for all vehicles

New window glass

-- Refer to NEW WINDOW GLASS, PREPARING FOR INSTALLATION .

Continuation for all vehicles

-- Refer to BODY FLANGE, PREPARING FOR INSTALLATION .

-- Refer to INSTALLATION INSTRUCTIONS FOR BONDED WINDOWS .

-- Refer to MINIMUM CURING TIMES FOR BONDED WINDOWS .

-- Apply window adhesive to the marked adhesive surface of the side window all around. Refer to BONDED WINDOW GLASS, MATERIALS .

Dimensions for bead diameter:

• Height = 10 mm ± 1 mm
• Width = 6.5 mm ± 0.5 mm

-- Press the side window -1- on with the clip in the area of the C-pillar trim.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Guide the side window -1- in the -direction of arrow A- in the guide -3- and press it on.

-- Press the side window -1- with clips onto the C-pillar -arrow-.

Conditions

• If the side window -1- does not have clips, it must be aligned lengthwise at the edge of the side panel -2-.

-- Secure the side window -1- with commercially available adhesive tape.

-- Check the gap dimensions with Gauge - Gap Adjustment :3371  at the same time pay attention to the CENTER GAP DIMENSIONS .