Rear Window, Removing And Installing: Installing

Install in the reverse order of removal while noting the following:

Undamaged window glass

-- Refer to UNDAMAGED WINDOW GLASS, PREPARING FOR INSTALLATION .

Continuation for all vehicles

New window glass

-- Refer to NEW WINDOW GLASS, PREPARING FOR INSTALLATION .

Continuation for all vehicles

-- Refer to BODY FLANGE, PREPARING FOR INSTALLATION .

-- Refer to INSTALLATION INSTRUCTIONS FOR BONDED WINDOWS .

-- Refer to MINIMUM CURING TIMES FOR BONDED WINDOWS .

-- Apply window adhesive to the rear window all around. Refer to INSTALLATION INSTRUCTIONS FOR BONDED WINDOWS .

Dimensions for bead diameter:

• Height = 10 mm ± 1 mm
• Width = 6.5 mm ± 0.5 mm

The design of the spoiler depends on the model.

-- Guide the rear window -1- with distance to the body flange in the -direction of the arrow A- under the spoiler -2-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Position the rear window -1- with the centering pins -3- in the -direction of the arrow B- on the rear lid -4-.

Conditions

• If the rear window does not have a centering pin, it must be secured so that it will not slip.

-- Check the gap dimensions with Gauge - Gap Adjustment :3371  while paying attention to the Rear gap dimensions .