Overview - Bevel Box
- Bolt
- Replace after removing
- 25 Nm
- Heat Shield
- Nut
- Quantity: 2
- Tightening specification. Refer to OVERVIEW - DRIVE AXLE .
- Double Bolt
- Refer to Fig 3
- Heat Shield
- Bolt
- Refer to Fig 3
- Bevel Box
- Refer to Bevel Box, Removing .
- Refer to Bevel Box, Installing .
- Bolt
- Quantity: 4
- Replace after removing
- 40 Nm +90°
- Transmission Support
- Depending on the equipment/version
- Bolt
- Refer to Fig 2
- Bolt
- Quantity: 2
- Refer to Fig 2
| Step | Bolts | Tightening Specification/Additional Turn |
|---|---|---|
| 1. | -1- and -2- | all the way by hand |
| 2. | -2- | 40 Nm |
| 3. | -1- | 40 Nm |
| Bolt, double bolt | Tightening Specification |
|---|---|
| -3- | 40 Nm |
| -2- | 40 Nm |