Engine, Securing To Engine And Transmission Holder

Special tools and workshop equipment required

CAUTION:

There is a risk of injury from the lifted motor falling.

The possibility for parts of the body to be pinched or crushed increases.

- Secure the mounting hooks and pins on the lifting tackle with a spring retainer.

Condition

Vehicles with intermediate plate:

-- Remove the intermediate plate. Refer to Intermediate plate, removing and installing .

Continuation for all vehicles

Vehicles with 1.0 L Gasoline Engine:

-- Balance the center of gravity of the engine, for this, insert rails with holes into the holes -2- and -7-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Engage the Engine Sling :2024B -C- onto the engine and onto the Shop Crane :VAS 6100 -A-.

-- Secure the all mounting hooks and pins to the rails with holes using spring connectors -B-.

Continuation for all vehicles

Vehicles with 1.5L Gasoline Engine:

-- Balance the center of gravity of the engine, for this, insert rails with holes into the holes -2- and -7-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Engage the Engine Sling :2024B -C- onto the engine and onto the Shop Crane :VAS 6100 -A-.

-- Secure the all mounting hooks and pins to the rails with holes using spring connectors -B-.

Continuation for all vehicles

Vehicles with 2.0 L Gasoline Engine:

-- Balance the center of gravity of the engine, for this, insert rails with holes into the holes -2- and -8-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Engage the Engine Sling :2024B -C- onto the engine and onto the Shop Crane :VAS 6100 -A-.

-- Secure the all mounting hooks and pins to the rails with holes using spring connectors -B-.

Continuation for all vehicles

Vehicles with 2.0L diesel engines:

-- Insert the spindles of the Lifting Tackle :3033 -B- at the positions -3- and -9-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Engage the lifting tackle -C- at the Shop Crane :VAS 6100 -A-.

-- Secure the spindles -B- at the engine and align using the knurled nut.

Continuation for all vehicles

-- Lift the engine from the engine bracket using the workshop crane.

-- Remove the alignment sleeves.

-- Secure the engine with the pins -arrows- to the Engine and Gearbox Bracket :VAS 6095A -A-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.