Vehicle, Lifting: Notes

WARNING: This page is about a different car, the 2025 Audi S3, 2025 Audi RS 3, and 2025 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

Using the hoist incorrectly can damage the vehicle.

Do not exceed the permitted load rating of the hoist.
Only lift the vehicle at the mounting points shown.
Position the mounting plate so that it is aligned centrally under the mounting points.
Maintain distance between the low-lying vehicle components and the hoist.

NOTE:

Applies to S models and RS models: Remove or position all mounting plates -2- so that the hoist support arm does not contact any vehicle trim panels.

Fig 1: Mounting Plate Position

Courtesy of AUDI OF AMERICA, LLC