Pneumatic Edge Milling Unit:VAS882005, APPLICATION: Basics
WARNING: This page is about a different car, the 2025 Audi S3, 2025 Audi RS 3, and 2025 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Always use a cutting oil VAS 882 001/5 -1- during milling procedures on steel panels. This ensures that there are no flying sparks,
The service life of the milling tool will be prolonged.
NOTE:
Always use the drill wax -1- during milling procedures on aluminum panels.
This prevents the milling tool from clogging. The service life of the milling tool will be prolonged.
NOTE:
During front side procedures using the milling tool -2-, the protective cover -1- must be used.