Body Dimensions: Notes
WARNING: This page is about a different car, the 2025 Audi S3, 2025 Audi RS 3, and 2025 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The body dimensions are only for inspection. The Alignment Bracket Set is standard.
Bolts, plugs, trim panels and attachments must be removed before the measuring procedure.
Use the Telescoping Gauge - 41.5-92.5cm :VAS5159 or the Telescoping Gauge - 92-260cm :VAS5160 to determine the body dimensions.
Make sure that the test probes are always the same length to avoid inaccuracy when measuring.
Body Front
NOTE:
Dimensions are only for checking. The alignment bracket set is standard.