Fwd Vehicles, Checking

WARNING: This page is about a different car, the 2025 Audi S3, 2025 Audi RS 3, and 2025 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Pay attention to the instructions on the test stand screen.

The brake inspection must be preformed on a one-axle roller test stand.
The test speed must not exceed 6 km/h (3.7 mph), otherwise the brakes may lock up due to the roller start-up delay (EDL regulation).
Test stands approved by Audi meet these requirements.