Seat Adjustment Control Module, Removing And Installing: Installing

WARNING: This page is about a different car, the 2025 Audi S3, 2025 Audi RS 3, and 2025 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal, while noting the following:

Condition

If the control module was replaced, mind and follow the sequence when connecting the connectors.

-- First connect the connector -5- (coding connector), then connect the other connectors -1- through -4-.

Fig 1: Control Module Connect Sequence

Courtesy of AUDI OF AMERICA, LLC

If the Memory Seat/Steering Column Adjustment Control Module -J136- is replaced, complete the test plan for replacing the control module:

-- Complete the "Control module, replacing" function using the Vehicle Diagnostic Tester. Refer to Diagnostic Entries .