MECHATRONIC, Removing And Installing: Installing
WARNING: This page is about a different car, the 2025 Audi S3 and 2025 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. At the same time note the following:
- Replace the bolts for the DSG Transmission Mechatronic -J743- after removing.
- If the Dual-Clutch Transmission Mechatronic -J743- is being replaced, the O-ring is included in the replacement part delivery package.
-- Carefully place the Mechatronic -1- in the transmission.
-- Tighten the bolts -arrows- for the Dual-Clutch Transmission Mechatronic -J743-. Refer to Figure.
-- Install the transmission fluid pan. Refer to TRANSMISSION FLUID PAN, REMOVING AND INSTALLING .
Basic Setting, Performing:
-- Connect the Vehicle diagnostic tester and select Individual test .
- Diagnostic-capable systems
- 0002 - Transmission electronics
- 0002 - Transmission electronics functions
- 0002 - Mechatronic, replacing
-- Follow the instructions on the display.