Bevel Box, Tightening Specification
WARNING: This page is about a different car, the 2025 Audi S3 and 2025 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Replace the bolts after removing them.
-- Tighten the bolts in steps as follows:
| Step | Bolts | Tightening Specification/Additional Turn |
|---|---|---|
| 1. | -arrows- | Install all the way by hand |
| 2. | -arrows- | 40 Nm diagonally |
| 3. | -arrows- | 90° additional turn, diagonally |
-- Tighten the bolts in steps as follows:
| Step | Bolts | Tightening Specification |
|---|---|---|
| 1. | -1 and 2- | Install all the way by hand |
| 2. | -1- | 8 Nm |
| 3. | -2- | 8 Nm |
| 4. | -1- | 40 Nm |
| 5. | -2- | 40 Nm |