Refrigerant Circuit, Charging: Notes
WARNING: This page is about a different car, the 2025 Audi S3, 2025 Audi RS 3, and 2025 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- A/C Service Station
- Depending on the A/C Service Station used, changes to the work procedure may be needed. Refer to Owner's Manual.
- Filling the refrigerant circuit must be done via the high pressure connection, the low pressure connection can normally stay connected. Refer to Owner's Manual.
- Make sure the A/C Service Station is on the same level as the vehicle whose refrigerant circuit is to be charged (maximum difference 50 cm) when charging the refrigerant circuit. If a difference in height is too large, a difference between the amount of refrigerant displayed on the service station and the actual amount filled in the circuit may result (depending on the version of the A/C Service Station). The precision of the A/C Service Station may be impaired by that.