Guidelines For Clean Working Conditions
WARNING: This page is about a different car, the 2025 Audi S3, 2025 Audi RS 3, and 2025 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Even minor contamination can lead to malfunctions and leaks. Therefore, follow these guidelines for clean working conditions during all work:
- Thoroughly clean the connection points/maintenance openings and the surrounding area before loosening/opening.
- Use lint-free cleaning cloth for cleaning.
- Seal off cables, connections and components immediately after opening them, using seals from the Engine Bung Set :VAS 6122 .
- Place removed components on a clean surface and cover them with lint-free cleaning cloths.
- Carefully cover or seal opened components.
- Immediately remove leaking liquids and clean the affected areas.
- Only install clean components. Wear clean gloves and remove replacement parts from the packaging just before installing.
- Supplied transport and protective packaging and sealing cover should only be removed immediately before installing.
- Protect the disconnected electrical or optical connectors from dirt and moisture and only connect when they are dry.
Vehicle and Engine Wash:
- Never direct the jet of water from a pressure washer at electrical components or connectors when cleaning the vehicle or engine.