Overview - Underbody Protection

Condition

• During the repair, the underbody protection is to be replicated according to its original conditions in appearance and layer thickness.
• Water drain holes must remain free.
• All threaded pins, weld nuts with M-threads, and all other pins and contact surfaces must be functional after applying the underbody protection.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

a -

Underbody Protection Layer Thickness = 0.3 mm

b -

Underbody Protection Layer Thickness = 0.5 mm

c -

Underbody Protection Layer Thickness = 1.2 mm