Shift Mechanism, Removing And Installing: Removing
-- Put the transmission in the "P" position.
-- Remove the center console. Refer to CENTER CONSOLE, REMOVING AND INSTALLING .
Vehicles with diesel engines
-- Remove the air filter housing. Refer to the appropriate service information .
Continuation for all vehicles
Vehicles with Gasoline Engine
-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .
Continuation for all vehicles
-- Remove the battery tray. Refer to BATTERY TRAY, REMOVING AND INSTALLING .
-- Remove the cable retainer -1- from the selector lever using the Pry Lever :80 - 200 .
-- Remove the bolts -2-.
-- Remove the front heat shield. Refer to FRONT HEAT SHIELD, REMOVING AND INSTALLING .
-- Remove the insulation mat, if equipped.
Vehicles with a rear center console vent:
-- Remove the air duct for the rear center console vent. Refer to AIR DUCT FOR REAR CENTER CONSOLE VENT, REMOVING AND INSTALLING .
Continuation for all vehicles
Vehicles with gearshift knob
-- Disconnect the connector -2-.
-- Detach the nuts -arrows- and remove the selector mechanism -1- downward.
Continuation for all vehicles
Vehicles with Shift by Wire:
-- If equipped, remove the screws -1- and remove the fastener -2-.
-- Remove the nuts -arrows-.
-- Remove the cover -1-.
-- Disconnect the connector -1-.
-- Remove the selector mechanism -2- downward.
Continuation for all vehicles