Selector Lever Cable, Removing And Installing: Removing
-- Put the transmission in the "P" position.
-- Remove the center console insert. Refer to CENTER CONSOLE INSERT, REMOVING AND INSTALLING .
Vehicles with diesel engines
-- Remove the air filter housing. Refer to the appropriate service information .
Continuation for all vehicles
Vehicles with Gasoline Engine
-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .
Continuation for all vehicles
-- Remove the battery tray. Refer to BATTERY TRAY, REMOVING AND INSTALLING .
Vehicles with bolted cable bracket
-- Remove the cable retainer -1- from the selector lever using the Pry Lever :80 - 200 .
-- Remove the bolts -2-.
Continuation for all vehicles
Vehicles with cable bracket clamp
-- Remove the cable retainer -2- from the selector lever -3-, using the Pry Lever :80 - 200 .
-- Remove the clamp -1-.
Continuation for all vehicles
Vehicles with inserted cable bracket
-- Remove the cable retainer -1- from the selector lever using the Pry Lever :80 - 200 .
-- Press together the cable locking mechanism in -direction of the arrow- and remove upward from the cable bracket -2-.
Continuation for all vehicles
-- Remove the front heat shield. Refer to FRONT HEAT SHIELD, REMOVING AND INSTALLING .
-- Put the transmission in the "N" position.
Vehicles with twist lock
-- Remove the plug -4-.
-- Remove the lock washer -2-.
-- Turn the locking mechanism -1- 90° in the -direction of the arrow-.
-- Remove the cable -3-.
Continuation for all vehicles
Vehicles without twist lock
-- Remove the cap -2- using a commercially available screwdriver -A- in -direction of the arrow- from the selector mechanism -1-.
-- Release the cable -3- and remove in -direction of the arrow A- from the selector lever -2-.
-- Remove the lock washer -4-.
-- Remove the cable -3- in the -direction of the arrow B- from the selector mechanism -1-.
Continuation for all vehicles