2. Selector Mechanism Functionality Test
WARNING: This page is about a different car, the 2025 Audi S3 and 2025 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Test step 2.1
- Engine running, "D" position selected, and vehicle speed greater than 4 km/h (2.5 mph).
-- Engage the "N" position.
"N" position is engaged.
-- Engage the "R" position. "R" position is not possible.
"N" position is engaged.
-- Then engage the "D" position without applying the brakes; vehicle speed is greater than 4 km/h (2.5 mph).
It must be possible.
Test step 2.2
- Engine running, "D", "R" or "N" position is selected, vehicle speed = 0 km/h (0 mph).
-- Select the drive position "P" :
"P" position must be displayed on the Selector Lever Transmission Range Display -Y5-.