Lane Change Assistance Control Module -J769- / -J770-, Removing And Installing: Removing
WARNING: This page is about a different car, the 2025 Audi S3, 2025 Audi RS 3, and 2025 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Component location. Refer to COMPONENT LOCATION OVERVIEW - SENSORS AND CONTROL MODULES IN REAR SECTION OF VEHICLE .
-- Remove the rear bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .
-- Free up the wiring harness -arrows-.
-- Remove the bolt -2-.
-- Remove the shield -3- from the guides -1- from the bumper cover.
-- Remove the bolt -arrow-.
-- Remove the control module -2- from the guides of the shield -1-.
-- Disconnect the connector -3-.