Emergency Release From P
Special tools and workshop equipment required
- Connecting Pin :T10027A
-- Remove the front center console bracket. Refer to CENTER CONSOLE BRACKET, REMOVING AND INSTALLING .
If the Connecting Pin :T10027A is not installed, the parking lock will be permanently disengaged after pulling the T-bar. Then it cannot be re-engaged mechanically. It is then only possible to engage the parking lock electronically (pressing the P button).
Emergency Release, Activating
-- Insert the Connecting Pin :T10027A into the opening -arrow B-.
-- Depress the brake.
-- Free up the T-bar -1- all the way upward and hold it in this position.
-- Press the locking button -2- downward. The button must stay in the pressed position when releasing the T-bar.
The parking lock is now permanently disengaged.
If the parking lock should be mechanically re-engaged, the Connecting Pin :T10027A must remain installed.
Emergency Release, Deactivating
-- Depress the brake.
-- Pull the T-handle -1- upward until the locking button -2- springs back into the upper position.
-- Slowly release the T-handle.
- The lock will audibly return to its starting position at the same time. The parking lock is re-engaged.
-- Bring the T-handle -1- back into its starting position by placing the cable around the ridge -arrow A-.
-- Remove the Connecting Pin :T10027A .
Further installation is performed in reverse order of the removal.