Vehicle Electrical System Control Module J519, Removing And Installing, LHD: Removing

If the vehicle electrical system control module is replaced, the test plan for replacing the vehicle electrical system control module must be performed.

-- Perform the "vehicle electrical system control module, replacing" function using the Vehicle Diagnostic Tester . Refer to DIAGNOSTIC ENTRIES .

Continuation

-- Remove the footwell cover on the driver side. Refer to DRIVER SIDE FOOTWELL COVER, REMOVING AND INSTALLING .

-- Disconnect the connectors -2-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Release the springs -3- in the -direction of arrow A-.

-- Pivot out the vehicle electrical system control module -1- from the bracket -4-.